A marley-type floor is quite expensive, about $16.25 per square foot. For an average dance studio space of 1,000 square feet, that’s over $16,000. The vinyl strips in a marley-type floor come in long rolls and are taped together with a special adhesive. The rolls are about five feet wide and 60 feet in length.
How much does it cost to build a dance floor?
In that case, dance surfaces alone range from $1.78 to $7.23 per square foot. If you have the floor surface and are in need of a floating wood subfloor, you can build your own for approximately $2.50 per square foot or buy a prefab transportable subfloor from $3.25 to $3.75.
How much does a portable dance floor cost?
For portable or touring marley dance floors, the cost will continue to fall in the same range as above. Should you be looking for a modular dance floor system, expect to pay between $4 and $7 per square foot for vinyl topped snap together dance floor tiles and up to $30 per square foot for wooden dance floor tiles.
How much is a 12×12 dance floor?
How long does Marley floor last?
A marley dance floor, which is a vinyl, roll-out flooring, is an effective material for home studios, schools and most dance settings. Offering both durability and versatility, a well-kept vinyl floor can last up to 15 years with the proper maintenance.
How big is a 12×12 dance floor?
Popular Wedding Dance Floor Sizes
When it comes to choosing your dance floor size, we have found that a 12’x12′ dance floor usually accommodates a small to medium wedding. That’s 144 square feet.
Is Marley floor expensive?
A marley-type floor is made up of vinyl strips and a pointe shoe does not slip on this type of surface. A slippery surface could cause a dancer to fall and become injured. A marley-type floor is quite expensive, about $16.25 per square foot. For an average dance studio space of 1,000 square feet, that’s over $16,000.
What size dance floor do I need for 100 guests?
What is the best dance floor size for 100 guests? A 12×12 dance floor is a good size for an event with 100 people. This will accommodate 30-40 people dancing at one time.
What is dance floor called?
In the dance industry, the term “marley” describes just about any roll-out vinyl floor used as a dance floor.
Can you put a dance floor on grass?
It may also make the flooring itself uneven, and an uneven dance floor on grass can be dangerous for dancers. You’ll have the best results if you install the flooring over grass that has been mowed, since it will create a firmer, flatter surface than you’ll have if you’re working with grass that is longer.
What is a good size dance floor?
Here’s a good rule of thumb: There should be at least three square feet of dance floor space for every two guests. So, if you have 150 guests, you would need a 15′ x 15′ dance floor; 200 guests would be about an 18′ x 18′ area; 400 guests calls for about 25′ x 25′ of space.
How big of a dance floor do I need for 75 guests?
Generally, never more than 50% of the people dance at any time. Each couple requires about nine square feet. If you have a party for 150 people (75 couples), approx. 40 couples will be the maximum number dancing.
How many sq ft is 15×15?
How many square feet is a 15×15 room? The square footage of a room 15 feet wide and 15 feet long is 225 square feet. The square footage is calculated by multiplying the width (15 ft) by the length (15 ft).
What goes under a Marley floor?
The home marley dance floor systems feature either a foam, plastic or rubber underlayment. All are installed beneath an all-purpose vinyl marley surface. The type of underlayment that is best for your installation is determined by the surface of your existing floor.
Can you vacuum Marley floor?
For Heavy Use ” Bi-Monthly Maintenance
Vacuum the entire floor surface with a heavy-duty commercial vacuum to remove all loose dirt, dust and other foreign matter. Mix a solution of lukewarm water and an environmentally safe, low-odor stripper ideal for use on highly trafficked vinyl performance floors.
Can you put Marley floor over concrete?
High Density Foam Dance Subfloor Over Concrete
Greatmats recommends Sports Plus Designer Foam tiles, which are 2×2 feet in size and … inch thick. … From there, simply lay the marley surface on top for a complete multi-purpose dance floor. No adhesives are necessary for the creation of the dance floor over concrete.