The front side offers a smooth finish and moisture protection, depending on the type of drywall chosen. The backside of the drywall is usually brown and feels a bit rough. It’s essential that if you want to DIY your drywall installation, the brown side goes against the wall, and the smooth side faces out.
What happens if you install Sheetrock backwards?
If you hang drywall backwards, the rougher backing material will be visible through paint. Also, drywall has beveled edges that ease the process of drywall finishing. Drywall finishers embed paper drywall tape along the seams, so installing the tape within the bevel makes the taped seam rest below a flush level.
Which way does sheetrock go?
Does the green side of drywall faces out?
The green side should face toward you when you install greenboard. The brownish side should face away. Another way to identify the correct side is to install the greenboard so the beveled edges face outward. The beveled edges run the length of the board along the top and bottom.
Can the brown side of drywall faces out?
Yes, it does. While drywall can have a few different colors on the front, the back is almost always brown. And that brown side should never face out.
Which way does purple drywall face?
When hanging PURPLE drywall, which side faces out? Always hang PURPLE drywall with the purple side out, or facing into the room. It decorates like standard drywall, which means the purple won’t be visible under white or lightly colored paint.
What’s the difference in sheetrock and drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
Should sheetrock be hung vertically or horizontally?
On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. However, on residential jobs, the drywall on the walls is typically hung horizontally. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits.
Does it matter if you hang drywall vertically or horizontally?
Commercial: Hang the drywall vertically. On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. Residential: How high are the walls? For walls nine feet high or shorter, hanging the drywall horizontally has a number of benefits.
Do drywall seams have to be on a stud?
Drywall Is Not on a Stud
All edges of all sheets of drywall must land on a solid surface such as a stud. A hanging drywall edge may work in the short-term, but in the long-term it can result in cracks and other serious wall issues. Sometimes, the drywall does not horizontally reach a stud.
Is PURPLE drywall better than Green?
“Green drywall (also known as greenboard) is only moisture-resistant. PURPLE®drywall, only made by National Gypsum, is superior because it offers moisture, mold and mildew resistance. In addition, many PURPLE® drywall products offer added benefits, including resistance to scratches, scuffs, dents and sound.
Should I use green board on a bathroom ceiling?
Greenboard weakens more than standard drywall does when it gets completely saturated. Since bathroom ceilings tend to collect a great deal of moisture this is a common weak point for the material.
Should I use green board in basement?
Green board is intended for use for ordinary wall applications in areas that experience constant high humidity, such as bathrooms and basements, but it does not have the superior mold-resistance of newer products.
Where should you use PURPLE drywall?
Purple Drywall
It can be used with all wall and ceiling applications and is ideally suited where enhanced moisture and mold resistance is desired. If it is going to be in contact with water, this is the one to use.
What is the difference between blue board and green board?
While standard drywall is the gray hue you are probably familiar with, some specialty drywall is known by its color, much like blue board. Green board is a term used for mold-resistant drywall that is common in bathrooms and other moisture prone places.
What is the PURPLE drywall for?
While all gypsum-based drywall is naturally fire-resistant, the PURPLE family of products is unique because it also resists moisture, mold and mildew. In addition, some PURPLE drywall products also stand up to scratches, scuffs, dents and noise. So go ahead, let life happen. With PURPLE, your walls are ready.
Which is cheaper drywall or sheetrock?
As with most name brand materials, sheetrock tends to be a bit more expensive than its non-name brand counterparts. However, many builders believe sheetrock provides a better quality product and is a bit easier to work with than generic brand drywall.
How do you hang sheetrock?
Is drywall the cheapest wall covering?
Many of today’s houses use drywalls for their interior wall covering. While it’s cheap and easier to work with than other materials, drywall installation remains a tough process that involves taping, mudding, and sanding.
Should drywall be staggered?
Generally, yes, sheetrock should be staggered. Most drywall contractors recommend staggering sheetrock boards so that the joints in one row do not match up with the joints in the next row, which adds strength to the wall or ceiling and helps minimize cracks.
How much gap should be between sheets of drywall?
Always leave a 1/2-inch gap at the floor. This allows for floor and wall expansion without cracking the drywall. It also helps prevents moisture wicking if the floor floods.
How many screws go into a 4×8 sheet of drywall?
Use about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.