Most authorities having jurisdiction (AHJ) will expect at least 36-inches clearance in front of the extinguisher as long as it is still visible. They “borrow” this 36-inch clearance measurement from NFPA 70-2011, Article 110.26 for electrical control panels.
How much space should be kept clear around all fire equipment?
Each extinguisher shall be located in conspicuous, readily accessible location. Fire and Rescue NSW recommends that a surrounding clearance of a minimum of 1000mm be maintained around each extinguisher.
What is the OSHA standard for fire extinguishers?
NFPA recommends one 2-A fire extinguisher for every 3,000 square feet. OSHA requires employees to have access to an extinguisher within 75 feet. Employees should have access to a fire extinguisher within either 30 or 50 feet, depending on the hazard in question and the rating of the extinguisher (see below).
What is a Coast Guard requirement for fire extinguishers?
The Coast Guard requires boats to have at least one B-1 marine fire extinguisher on board. Depending on the size of your boat you may need more than one. Boats less than 26′ have to have at least one B-1 fire extinguisher on board. Boats 26′-40′ need to have at least two B-1 fire extinguishers on board.
Who is responsible for fire extinguishers?
The appropriate person who has had the correct training should be responsible for using a fire extinguisher on a small fire. You should not use one if you have not been properly trained, unless the fire extinguisher is to be used as an aid to escape.
The regulations state that a minimum of two Class A fire extinguishers on every floor of a building are needed, unless the premises are very small, in which case one may be acceptable. … If there is a sprinkler or automatic suppression system in place, fewer fire extinguishers may be required.
Can I put something in front of a fire extinguisher?
No, a clear floor space needs to be provided in front of fire extinguishers to allow easy access.
How do you calculate the number of fire extinguishers?
The calculation can be simplified by applying the rule of thumb that one 13A extinguisher covers 200 square metres of floor area. To calculate how many 13A extinguishers are required, divide the floor area by 200, and round up.
Where is the best place to put a fire extinguisher?
How do you tell if a Kidde fire extinguisher is expired?
The model number is printed on the fire extinguisher label. For units produced in 2007 and beyond, the date of manufacture is a 10-digit date code printed on the side of the cylinder, near the bottom. Digits five through nine represent the day and year of manufacture in DDDYY format.
Is fire extinguisher required on PWC?
All vessels, including PWC, are required to have a Type B fire extinguisher on board if one or more of the following conditions exist: Closed compartments under seats where portable fuel tanks may be stored. Closed storage compartments in which flammable or combustible materials may be stored. Closed living spaces.
Which Class of fire extinguishers are water based extinguishers?
Water fire extinguishers have a red label and a class A rating. They are suitable for fighting fires involving solid combustibles such as wood, paper and textiles.
Who should have fire extinguisher training?
What happens if you spray someone with a fire extinguisher?
Direct contact of the skin with the pressurized CO2 can cause frostbite. The damage to the skin can be limited to mild redness, but blisters are also possible. Damage to the eyes can also occur with direct exposure. If you suspect someone has inhaled spray from a fire extinguisher, get them to fresh air immediately.
What fire extinguisher is used for materials?
Use: Water fire extinguishers are best for combatting Class A fires, for example fires involving organic solid materials, such as wood, cloth, fabric, paper and plastics.