For refrigerators with electronic controls (most Side-by-Side and French-Door refrigerators) ” Fresh food compartment should be set for 37 degrees Fahrenheit and the freezer should be set for 0 degrees Fahrenheit.
What number should my Frigidaire freezer be set at 1 9?
Basic Temperature Settings
If you have the 1 to 5 format, the best way is to set it to three. Whereas, if you have the 1 to 9 format make it 4. The ideal refrigerator temperature settings range between 34 °F to 38 °F or 1 °C to 3 °C and the ideal freezer temperature settings range around 0 °F (-18 °C) or lower.
What number should freezer be on?
The ideal fridge temperature is between 37°F (3°C) and 40°F (5°C). Your freezer temperature should be at 0°F (-18°C).
What is the best temperature for a freezer and refrigerator Frigidaire?
Yep: A fridge temperature of 37° F will keep fresh food good for as long as possible”with no ice crystals on lettuce or bacteria breeding in raw meats. As for the freezer, a temperature of 0° F will keep foods thoroughly frozen.
How do I set the temperature on my Frigidaire freezer?
A freezer-on-top Frigidaire model may have a slider. Move the slider up to lower the temperature toward the coldest setting. For electronic controls, push the down button to lower the temperature in the refrigerator. Push the up button to increase the temperature of the freezer compartment.
What does high temp mean on my Frigidaire freezer?
H or HI or High Temp ” Indicates the freezer and/or refrigerator section of your appliance have exceeded the temperature threshold. This is usually caused by inadvertently not closing the door all the way or leaving the door open for an extended period of time.
What is the best freezer temperature setting?
Keep your appliances at the proper temperatures.
Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C).
What number should freezer be on 1 7?
The temperature control dial has 7 settings, plus OFF. “1” is the warmest, “7” is the coldest, and turning the temperature dial to OFF shuts down the compressor. Set the dial to “4” and allow 24 hours to pass before adjusting the temperature to your needs.
Is a fridge colder on 1 or 5?
Some fridges don’t show the temperature but work on a setting that is listed from 1 to 5. The numbers on the fridge’s temperature dial indicate the refrigerating power. Therefore, the higher the setting, the cooler the fridge will be. Choosing setting 5 will make your fridge the coldest.
Is 5 degrees OK for a fridge?
On every fridge the rules for the coldest settings are always the following: The numbers on the fridge’s temperature dial indicate refrigerant power. The higher the number goes the colder the fridge will maintain. Setting it to 5 will make your fridge the coldest.
Is 34 too cold for refrigerator?
Refrigerators should be set to 40 degrees F (4 degrees C) or colder. A good temperature range for a refrigerator is between 34-38 degrees F (1-3 degrees C). … Temperatures between 34-38 degrees F (1-3 degrees C) will not kill bacteria and mold.
What is average freezer temperature?
Why is my freezer temp going up and down?
If there is not much of a load (food) in the freezer, every time it goes into a defrost cycle, the temperature will get very high. This is because there is not enough in it, to hold the temperature down. In this case, simply add more food or just some ice to the freezer. The defrost timer can also be the cause.
Why is freezer temp high?
For freezers with an automatic defrost system, a broken defrost heating element or failed defrost bi-metal thermostat can prevent the defrost system from melting frost off the evaporator. … A failed electronic control board or a bad thermistor (also known as the temperature sensor) can also cause your freezer to warm up.
How do you reset the temperature on a Frigidaire refrigerator?
To reset the temperature of a Frigidaire refrigerator, press the “∧” or “∨” indicator to adjust it to the temperature setting you need. Once you touch it, the indicators will start blinking. After about 5 seconds of inactivity, the display will beep and be set to the new temperature.