If you are driving with your high-beam lights on, you must dim them at least 500 ft from any oncoming vehicle, so you don’t blind the oncoming driver. You must use low-beam lights if you are within 200-300 ft of the vehicle you are following.
When approaching another vehicle from the rear at night you must dim your high-beam headlights when you are within?
You must dim your high-beam headlights within: 500 feet of oncoming vehicles. When approaching a vehicle from behind, you are required to dim your bright headlights when you come within: 300 feet from the vehicle.
When approaching another vehicle at night from the rear you should dim your headlights when you are at least?
Use your low beams when you come within 500 feet (about one block) of an oncoming vehicle. Also use your low beams when following another vehicle within 300 feet.
When should you dim your high beams to low?
To protect other drivers when driving at night, change your headlights to their low beam setting within 500 feet of an oncoming vehicle.
When you are approaching another vehicle at night?
When following another vehicle, keep your low-beams on to avoid blinding the driver ahead of you. If you have car trouble at night, pull off the road as far as possible and turn on your hazard lights. Use your high-beam lights when driving in rural areas and on open highways away from urban and metropolitan areas.
When driving behind another vehicle at night you should?
When driving behind another vehicle at night, you should:
Use your high beam headlights. Explanation Use high beam headlights only when driving in rural areas and when other cars are not nearby. Lower your headlights to their low beam setting when you are following closely behind another driver.
What 3 things do you do if a car is approaching head on?
Blow your horn, steer right, and brake. Stay in the center of your lane, blow your horn, and brake.
When approaching a curve you should adjust your speed?
Reduce your speed before approaching a curve. Watch out for road signs warning of approaching curves so that you have ample time to slow down before steering through the curve. It is advisable to drive below the posted speed limit as you approach and drive through curves. Turn as little as possible.
When approaching a construction zone you should?
When you are driving at night you must?
What are low beams on a car?
Low beams are the ‘normal’ lights your car headlights emit and are used when driving at night or in a dim or dark setting such an indoor parking lot. … The light beam is angled towards the ground in order to illuminate the road and to avoid blinding other drivers. They are a way for other drivers to see you.
When an approaching driver at night blinds you by failing to dim their high beams you should look?
Straight down the middle of the road. If an approaching driver fails to dim their high beams, glance toward the right side of the road. This will keep you from being blinded by the other vehicle’s headlights and will allow you to see enough of the road to stay on course until the other vehicle has passed.
How do you use low beams?
The low beam icon is usually right next to the off position symbol and looks like a letter “D” that has slanting lines on the flat side of the D sign. Simply point your switch to the low beam symbol to turn on your dipped beam headlights.
When driving at night and a car is approaching you with their high beam headlights on you flash yours once and they fail to dim theirs what should you do?
If you are driving at night and a vehicle is approaching with its high beams activated, quickly flash your headlights one time. If the other driver fails to dim their lights, look toward the right side of the road to keep from being blinded by their headlights. Do not retaliate by using your own high beam headlights.
What should you do when approaching an accident scene?
When approaching an accident scene, you should:
Keep your attention on your driving. Keep moving. Stop if you are involved or if emergency help has not yet arrived.
When approaching an intersection for a left turn you should approach the intersection?
If a driver traveling straight approaches an intersection where another driver is already making a left turn, they must let that vehicle complete its turn before entering the intersection. Drivers entering a traffic circle or rotary must yield to drivers already in the circle.
When you see or hear an emergency vehicle approaching?
When an emergency vehicle is approaching: Pull over to the edge of the roadway, clear of intersections, and stop. Remain there until the emergency vehicle has passed. Watch for others.
When an approaching vehicle drifts into your lane you should?
When driving at night on a dimly lit street you should?
When driving at night on a dimly lit street, you should:
Drive slowly enough that you can stop within the area illuminated by your headlights. Turn on your high beam headlights to better see the vehicles ahead of you. Keep the instrument panel lights bright to be more visible to other drivers.
What should you do when you approach the top of a hill?
Maintain a steady speed. You may not know what is on the other side of a hill or just around a curve, even if you have driven the road many times. If a vehicle is stalled just out of sight on the roadway, you must be able to stop. Whenever you come to a hill or curve, adjust your speed so you can stop if necessary.
What is an oncoming driver?
You’ll almost always find the adjective oncoming describing a vehicle or other large object that’s moving fast in your direction, whether it’s an oncoming car, oncoming traffic, or an oncoming skateboarder who doesn’t see you standing there.
When approaching a curve in the road drivers should?
When approaching a curve, slow down appropriately and position your car to the side of your lane which is opposite the direction of the curve. If the road winds to the right, for example, move to the left side of your lane.
What should you do when approaching a blind curve?
When approaching a blind curve, a dip or a rise on a narrow road, slow down and keep to the right. Watch for dust indicating on-coming traffic and sound your horn to warn approaching vehicles if lack of visibility warrants. Stay as far right as possible when entering a blind curve.
Which lane position is the best for approaching a curve?
Motorists must be prepared to adjust their lane position several times while driving through a curve. Generally, approaching a curve while positioned just inside the right edge of the roadway is the safest move, as this will keep you as far away from oncoming traffic as possible.
What are 3 ways to safely navigate a construction zone?
When driving at night you should quizlet?
drive slower as a safety precaution. have only one taillight. reduces the glare from headlights and helps you see better. slowly until your eyes adjust.
When can you use high beams?
When you cannot see farther than 200 feet using low-beams, you should switch to high-beams, unless: Another vehicle is within 200 feet and approaching you from the opposite direction. You are less than 200 feet behind another vehicle. Heavy rain, fog, or snow are present.
How do you use high beams?
To turn on the high beams in your car, you again need to use the blinker lever. The very simple way of turning the high beam on is to push the blinker lever away from you. While pushing away the lever, you must feel the click to be sure that the high beams are turned on.
What is high beam low beam?
LOW BEAM ” REACH AND INTENSITY. Low beams are lower intensity and reach a shorter distance in front of your car. High beams are high intensity and light a greater distance.
Should you drive at night?
Driving at night is a lot riskier than driving in the daytime. According to the National Highway Traffic Safety Administration, you’re three times more likely to have a fatal accident at night than during the day. … Here’s what you can do to see more clearly and keep yourself safe on the road at night.
When driving at night it is most important for you to use your high beams?
High beam headlights should be used at night, whenever you’re unable to see enough of the road ahead to drive safely. Low visibility at night can be scary for even the most experienced drivers.
What is high beam and low beam in car?
While high beams were designed to maximize your seeing distance, low beams only go as far as 200 feet. That means high beams reach twice as far as your low beams. Yet, low beams are more ideal for city driving, where the roads are lit up with streetlights and there are other drivers on the road.
Where are high and low beams?
High beams are distinguished from low beams by their brighter light. They are sometimes referred to as “main beam” headlights. These terms are synonymous, and the term used depends entirely on the region. High beams point straight ahead, while low beams are angled down towards the road.
When a car with bright headlights comes towards you at night you should?
When meeting a car with blinding headlights, you should:
Look toward the right side of the road. Explanation If a vehicle comes toward you with its high beams on, look away from the headlights and toward the right side of the road until the car has passed. This will keep you from being blinded.
When driving at night with other traffic you should not look directly at oncoming headlights instead Weegy?
Don’t look directly at oncoming headlights. Instead, watch the right edge of your lane. Look quickly to be sure of the other vehicle’s position every few seconds. Drive as far to the right as you can if a vehicle with one light comes toward you.
When driving at night you may use your parking lights instead of headlights True or false?
While driving at night, you may use your parking lights instead of headlights. Explanation It is unlawful to drive at night using only your parking lights. You must use your headlights when driving in lowered visibility.
When should you approach a car at night?
If an approaching car is using its high-beams, don’t look directly into the oncoming headlights“look toward the right edge of your lane. Watch the oncoming car out of the corner of your eye. Do not try retaliating against the other driver by keeping your high-beam lights on. If you do, both of you may be blinded.
When should you meet an oncoming car at night?
Focus eyes directly on the steering. Focus eyes directly on the oncoming vehicle? s lights. Increase speed to pass the oncoming vehicle.
When driving at night you should use your low beams when an oncoming vehicle is within?
Use your low beams when you come within 500 feet (about one block) of an oncoming vehicle.